Smart Wake-up Band

When you first power on your Vibraso band, you’ll see the time screen appear. To begin setting it up, press and hold the button for about three seconds. The hour digits will start flashing, which means you’re ready to adjust them. Press the button repeatedly until the correct hour is displayed, then hold the button again to move on to minutes. The same pattern continues as you set the minutes, the month, the day, and the year. You can also switch between 12-hour and 24-hour time formats during this process.

After the time and date are set, the screen will guide you through entering your height and weight. Whenever an option begins flashing, you can adjust it with short presses and confirm your selection with another long press. If at any point you pause for more than roughly four and a half seconds, the band will automatically exit setup and return to the main time screen. No problem if that happens — simply hold the button for three seconds again to restart the setup from the beginning.

Once your basic settings are saved, you can move on to creating an alarm. Tap the button five times to show the first alarm slot. If you see “A1 OF,” it means this alarm is currently turned off. To activate it, hold the button for three seconds until the hour starts blinking. Set the hour with short presses, hold again to move to the minutes, and hold once more to save the alarm. That alarm will now ring at the same time every day until you decide to change or disable it. Additional alarms are accessible the same way — pressing the button six or seven times will show the next alarm slots, where you can repeat the same process.

If you ever need to turn an alarm off, go to the alarm screen, hold the button until it enters editing mode, tap until you see “A1 OF,” and hold once more to confirm. The alarm will remain disabled until you manually reactivate it.

To check the battery level, simply press and hold the button for three seconds while the band is idle. The screen will display the remaining percentage before returning to standby mode.

Once all your settings are complete, the band will automatically save your preferences after about eight seconds of no activity. When it returns to standby, the device is fully configured and ready to use.